变In组分沟道的MM-HEMT材料电子输运特性研究

在变缓冲层高迁移率晶体管（MM_HEMT）器件中，二维电子气的输运性质对器件性能起着决定作用.通过低温下二维电子气横向电阻的量子振荡现象，结合变温度的Hall测量，系统研究了不同In组分沟道MM_HEMT器件中子带电子迁移率和浓度随温度的变化关系.结果表明，沟道中In组分为0.65的样品，材料电学性能最好，In组分高于0.65的样品，严重的晶格失配将产生位错，引起迁移率下降，大大影响材料和器件的性能. 关键词： 变缓冲层高迁移率晶体管 Shubnikov_de Hass 振荡     

Synthesis,X-Ray Structure and Characterization of a Triruthenium Cluster Complex Ru_3~Ⅲ(μ_3-O)(μ-CH_3COO)_6(py)_2Cl with Four Steps One-electron Redox Processes

Great attention is currently paid to the synthesis of polynuclear transition metal complexes as well as their photochemical, photophysical, and electrochemical properties. The design of multicomponent systems capable of performing useful light- and/or redox-induced function is of special interest1. The oxo-centered carboxylate-bridge trinuclear ruthenium clusters have been investigated extensively during recent decades because they have remarkable electron-transfer properties, intense visibl…     

Some sufficient conditions for oscillation of impulsive delay hyperbolic systems with Robin boundary conditions

This paper deals with the oscillation problems of delay hyperbolic systems with impulses. Some sufficient conditions for oscillations of impulsive delay hyperbolic systems with Robin boundary conditions are obtained and the criteria of oscillation of the systems are established.     

Preparation of nanometer MgO by sol-gel auto-combustion

Nanometer MgO was prepared via a sol-gel auto-combustion technique using magnesium nitrate as raw material and citric acid as chelating agent. IR spectra of the dried gel were used to investigate the structure of the precursors. By studying the different TG curves of magnesium citrate gel prepared by different methods, we found that a combustion process occurred and the nitrate ions acted as an oxidant in the combustion process. TEM photographs of synthesized powders from the sol-gel auto-combustion showed that the crystallites were uniform in size. In addition, the XRD pattern of this sample showed that the particle size was 8.9 nm. The BET curves, in turn, showed that the specific surface of the sample was 26.34 m²/g. The mechanism of the frothing process in restraining agglomeration is discussed. __________ Translated from Journal of East China Normal University (Natural Science), 2007, (2): 52–57 [译自: 华东师范大学学报(自然科学版)]     

三层同轴液柱内的热毛细对流的近似解析解

1引言在微重力下用浮区法生长高质量、大体积单晶体是一种很有应用前景的方法，但热毛细对流所引起的诸如宏观不均匀性、生长条纹等缺陷严重限制了这一方法的应用。目前，人们试着用液封方法抑制热毛细对流。文献［1～3］分别对两层流体系统内的热毛细对流所作的研究表明：通过液封，被封层内的热毛细对流可以得到显著抑制。本文对圆柱三层流体系统内的热毛细对流进行研究，为热毛细对流规律的揭示以及进一步总结出其控制方法提供了理论数值依据。2控制方程和边界条件考虑长为L的互不溶混的三层轴对称同轴液柱，如图1所示，两端壁保持定温T…     

Quantum Key Distribution Using High-Dimensional Quantum Error-Avoiding Code

Using high-dimensional quantum error-avoiding code, we present two new quantum key distribution protocols over a collective noisy channel, i.e. six-photon and five-photon quantum error-avoiding codes. Compared with the previous protocols using four-photon and three-photon quantum error-avoiding code, the qubit efficiencies of the new protocols have increases of 16.67% and 5% respectively. In addition, the security of these protocols is analysed with a conclusion that the new protocols are much more secure than the four-photon and three-photon ones.     

概率型算子在Lp空间的渐近性质

In 1985, Khan, R. A. established the asymptotic formulas of operators of probabilistic type inL1, space by introducing a newLp-norm. The purpose of this paper is to study the asymptotic rate of these operators, inLp (p>1) spaces. Project supported by the National Natural Science Foundation of China     

源气体对沉积的a-C∶F∶H薄膜结构的影响

采用微波电子回旋共振等离子体化学气相沉积(MWPECRCVD)方法,使用不同的源气体(CHF3CH4,CHF3C2H2,CHF3C6H6)体系制备了aC∶F∶H薄膜.由于CH4,C2H2,C6H6气体在等离子体中的分解反应不同导致了薄膜的沉积速率和结构上的差异.红外吸收谱的结果表明,用C6H6CHF3作为源气体沉积的薄膜中几乎不含H,而用C2H2CHF3所沉积的薄膜中的含氟量最高,其相应的CF振动峰位向高频方向偏移.薄膜的真空退火结果表明,aC∶F∶H薄膜的热稳定性除了取决于薄膜的CC键浓度外,还与CC键 关键词： 氟化非晶碳膜 电子回旋共振化学气相沉积 红外吸收光谱     

HL－1装置辅助加热等对能量约束的影响

在ＨＬ－１托卡马克上进行了辅助加热、加料、电流驱动的物理实验研究。在改善等离子体约束方面，某些实验取得了较好的结果。在适当的稳定放电条件下，低杂波电流驱动和弹丸注入辅助加料，均能使等离子体能量约束得到一定程度的改善，与相同密度条件下的欧姆加热放电相比，能量约束时间提高了约３０％。在电子回旋共振加热等离子体实验中，等离子体总能量明显增加，但与相同密度条件下的欧姆加热放电相比，能量约束时间减少了约２０％。